Add to quote request

Product Documents

Technical Documents

CAD - Parasolid
Qualification Certificate

Log in or request access to download the technical documents

NanoCom SDR MK3

GomSpace’s flight proven NanoCom SDR MK3 is a uniquely modular and compact high performance SDR platform, built to support custom RF applications. Featuring a powerful Zynq®7030/45 System on a Chip (SoC) at its core, its small form factor can incorporate up to three NanoCom TR600 MK3 Transceivers, each offering 2xRX and 2xTX Channels, making it a truly flexible, versatile, and cost-effective solution. 
This flexibility allows a very wide range of custom mission applications ranging from SIGINT/Spectrum Monitoring and Remote Sensing to custom communication solutions:   

  • High data rate intensive applications such as SIGINT/Spectrum Monitoring, 
  • Custom broadband for downloads such as DVBS2
  • Multiband / Multi rate communications
  • Broad band download + Telemetry and Telecommand (TMTC) / Telemetry, Tracking and Control (TT&C) 
  • Narrowband IoT and tracking solutions such as AIS and ADS-B

With hardware prepared for Store and Forward, NanoCom SDR MK3 is also a perfect choice for custom intersatellite link / crosslink solutions for constellations or Non-Terrestrial Network (NTN) data relay applications. 
NanoCom SDR MK3 comes with a wealth of configurable I/O and is complemented by GomSpace’s wide portfolio of antenna solutions, to aid quick, efficient and flexible integration.   For rapid development of custom SDR applications, GomSpace provides a comprehensive development kit.

Key Features


  • SoC Xilinx Zynq 7030/7045 Programmable SoC.
    • Dual ARM Cortex A9 MPCore, clocked up to 800 MHz
    • Powerful FPGA module – 125K / 350K logic cells
  • Memory: 1024MB DDR3 (512MB with ECC enabled) RAM, 256 MB NOR flash
  • Storage: 70GB eMMC (pSLC) and 233GB eMMC (MLC) with SEU bit flip detection
  • Mechanical dimensions:  95 mm x 95 mm x 31.5 mm (with 3 x TR600)
  • Mass: 240g
  • Radiation: 20 kRad TID

Key Baseband Interfaces:

  • SpaceWire: x3, data link/network layer
  • USB: x1, host/device
  • Fully Configurable FPGA I/O: 11 x LVDS pairs, 10 x I/O
  • Conditionally Configurable FPGA I/O:  12 x LVDS pairs (or Spacewire), 8 x I/O (or RS-485)
  • Conditionally Configurable ARM I/O:  6 x I/O (or eMMC#2)
  • Others: CAN/SPI/RS422/RS485/PPS

Key RF Interfaces / Specification:

  • Transceiver support: Up to 3 x NanoCom TR600 MK3 reconfigurable transceivers
  • Transceiver I/O:  Each TR600 transceiver - 2RX and 2TX transceiver RF Inputs/Outputs
  • Transceiver connectors:  SMPM RF connectors and Picoblade connector for Front End control
  • Frequency Band:  70 MHz to 6 GHz
  • Tunable Channel bandwidth:  200 KHz to 56 MHz
  • Resolution: 12-bit DACs and ADCs


Key Updates

NanoCom SDR MK2 v MK3

       MK2      MK3

    Persistent storage

    - NOR

    - eMM






70GB + 233GB

    High speed interfaces

   - USB

   - SpaceWire







    Low speed interfaces

    - RS422

    - RS485







  RF connector




  Front end control


I2C / CAN / ADC / DAC / 5V
  Power supply voltage

           5-32V DC            

12-32V DC


Follow us